-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathusb_hal.h
643 lines (477 loc) · 20.9 KB
/
usb_hal.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
/******************************************************************************
USB Hardware Abstraction Layer (HAL) (Header File)
Summary:
This file abstracts the hardware interface.
Description:
This file abstracts the hardware interface.
This file is located in the "\<Install Directory\>\\Microchip\\Include\\USB"
directory.
When including this file in a new project, this file can either be
referenced from the directory in which it was installed or copied
directly into the user application folder. If the first method is
chosen to keep the file located in the folder in which it is installed
then include paths need to be added so that the library and the
application both know where to reference each others files. If the
application folder is located in the same folder as the Microchip
folder (like the current demo folders), then the following include
paths need to be added to the application's project:
.
..\\..\\MicrochipInclude
If a different directory structure is used, modify the paths as
required. An example using absolute paths instead of relative paths
would be the following:
C:\\Microchip Solutions\\Microchip\\Include
C:\\Microchip Solutions\\My Demo Application
*******************************************************************************/
//DOM-IGNORE-BEGIN
/******************************************************************************
File Description:
This file defines the interface to the USB hardware abstraction layer.
Filename: usb_hal.h
Dependancies: none
Processor: PIC18, PIC24, or PIC32 USB Microcontrollers
Hardware: The code is natively intended to be used on the following
hardware platforms: PICDEM™ FS USB Demo Board,
PIC18F87J50 FS USB Plug-In Module, or
Explorer 16 + PIC24 USB PIM. The firmware may be
modified for use on other USB platforms by editing the
HardwareProfile.h file.
Compiler: Microchip C18 (for PIC18) or C30 (for PIC24)
Company: Microchip Technology, Inc.
Software License Agreement:
The software supplied herewith by Microchip Technology Incorporated
(the “Company”) for its PICmicro® Microcontroller is intended and
supplied to you, the Company’s customer, for use solely and
exclusively on Microchip PICmicro Microcontroller products. The
software is owned by the Company and/or its supplier, and is
protected under applicable copyright laws. All rights are reserved.
Any use in violation of the foregoing restrictions may subject the
user to criminal sanctions under applicable laws, as well as to
civil liability for the breach of the terms and conditions of this
license.
THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*************************************************************************/
/********************************************************************
Change History:
Rev Description
---- -----------
2.6- No Change
2.6a
2.7 Minor changes changes to the structure of the conditional
compilation statement ordering.
********************************************************************/
#ifndef _USB_HAL_H_
#define _USB_HAL_H_
//DOM-IGNORE-END
#if defined(__18CXX)
#include "usb_hal_pic18.h"
#elif defined(__C30__)
#include "USB\usb_hal_pic24.h"
#elif defined(__PIC32MX__)
#include "USB\usb_hal_pic32.h"
#else
#error "Silicon Platform not defined"
#endif
/**********************
Interface Routines
**********************/
/*************************************************************************
Function:
void USBHALSetBusAddress( BYTE addr )
Description:
This routine sets the address of the system on the USB
when acting as a peripheral device.
Preconditions:
1. USBHALInitialize must have been called to
initialize the USB HAL.
2. Endpoint zero (0) must be configured as appropriate
by calls to USBHALSetEpConfiguration.
3. The system must have been enumerated on the USB (as
a device).
Parameters:
addr Desired address of this device on the USB.
Return Values:
None
Side Effect:
The bus address has been set.
Remmarks:
The address is assigned by the host and is received in
a SET_ADDRESS setup request.
*************************************************************************/
/*
This routine is implemented as a macro to a lower-level level routine.
*/
#define USBHALSetBusAddress OTGCORE_SetDeviceAddr
void USBHALSetBusAddress( BYTE addr );
/*************************************************************************
Function:
void USBHALControlUsbResistors( BYTE flags );
Description:
This routine enables or disables the USB pull-up or
pull-down resistors as requested.
Precondition:
USBInitialize must have been called to initialize the
USB SW stack.
Parameters:
flags - This is a bit-mapped flags value indicating
which resistors to enable or disable (see below).
Return Values:
TRUE if successful, FALSE if not.
Side Effects:
The resistors are enabled as requested.
Remarks:
Used for USB peripheral control to connect to or
disconnect from the bus. Otherwise, used for OTG
SRP/HNP and host support.
*************************************************************************/
/*
This routine is implemented as a macro to a lower-level level routine.
*/
#if defined(__18CXX)
void USBHALControlUsbResistors( BYTE flags );
#else
#define USBHALControlUsbResistors OTGCORE_ControlUsbResistors
void USBHALControlUsbResistors( BYTE flags );
#endif
/* USBHALControlUsbResistors flags */
#define USB_HAL_PULL_UP_D_PLUS 0x80 // Pull D+ line high
#define USB_HAL_PULL_UP_D_MINUS 0x40 // Pull D- line high
#define USB_HAL_PULL_DN_D_PLUS 0x20 // Pull D+ line low
#define USB_HAL_PULL_DN_D_MINUS 0x10 // Pull D- line low
/*
The following are defined for convenience:
*/
#define USB_HAL_DEV_CONN_FULL_SPD USB_HAL_PULL_UP_D_PLUS
#define USB_HAL_DEV_CONN_LOW_SPD USB_HAL_PULL_UP_D_MINUS
#define USB_HAL_DEV_DISCONNECT 0
/*
To Do: Define a method to check for SE0 & a way to send a reset (SE0).
*/
/*************************************************************************
Function:
BOOL USBHALSessionIsValid( void )
Description:
This routine determines if there is currently a valid
USB session or not.
Precondition:
USBInitialize must have been called to initialize the
USB SW stack.
Parameters:
None
Return Values:
TRUE if the session is currently valid, FALSE if not.
Remarks:
Only used for host and OTG support.
*************************************************************************/
BOOL USBHALSessionIsValid( void );
/*************************************************************************
Function:
USBHALControlBusPower
Description:
This routine provides a bitmap of the most recent
error conditions to occur.
Precondition:
USBInitialize must have been called to initialize the
USB SW stack.
Parameters:
cmd - Identifies desired command (see below).
Return Values:
TRUE if successful, FALSE if not.
Remarks:
Only used for host and OTG support.
*************************************************************************/
BOOL USBHALControlBusPower( BYTE cmd );
/* USBHALControlBusPower Commands */
#define USB_VBUS_DISCHARGE 0 // Dicharge Vbus via resistor
#define USB_VBUS_CHARGE 1 // Charge Vbus via resistor
#define USB_VBUS_POWER_ON 3 // Supply power to Vbus
#define USB_VBUS_POWER_OFF 4 // Do not supply power to Vbus
/*
Note: All commands except USB_VBUS_POWER_ON imply that this device
does not actively supply power to Vbus.
*/
/*************************************************************************
Function:
unsigned long USBHALGetLastError( void )
Description:
This routine provides a bitmap of the most recent
error conditions to occur.
Precondition:
USBInitialize must have been called to initialize the
USB SW stack.
Parameters:
None
Return Values:
Bitmap indicating the most recent error condition(s).
Side Effect:
Error record is cleared.
Remarks:
Although record of the error state is cleared, nothing
is done to fix the condition or recover from the
error. The client must take appropriate steps.
*************************************************************************/
unsigned long USBHALGetLastError( void );
/*
USBHALGetLastError Error Bits.
*/
#define USBHAL_PID_ERR 0x00000001 // Packet ID Error
#define USBHAL_CRC5 0x00000002 // (Host) Token CRC5 check failed
#define USBHAL_HOST_EOF 0x00000002 // (Host) EOF not reached before next SOF
#define USBHAL_CRC16 0x00000004 // Data packet CRC error
#define USBHAL_DFN8 0x00000008 // Data field size not n*8 bits
#define USBHAL_BTO_ERR 0x00000010 // Bus turn-around timeout
#define USBHAL_DMA_ERR 0x00000020 // DMA error, unable to read/write memory
#define USBHAL_BTS_ERR 0x00000080 // Bit-stuffing error
#define USBHAL_XFER_ID 0x00000100 // Unable to identify transfer EP
#define USBHAL_NO_EP 0x00000200 // Invalid endpoint number
#define USBHAL_DMA_ERR2 0x00000400 // Error starting DMA transaction
/*************************************************************************
Function:
void USBHALHandleBusEvent ( void )
Description:
This routine checks the USB for any events that may
have occured and handles them appropriately. It may
be called directly to poll the USB and handle events
or it may be called in response to an interrupt.
Precondition:
USBInitialize must have been called to initialize the
USB SW stack.
Parameters:
None
Return Values:
None
Side Effects:
Depend on the event that may have occured.
Remarks:
None
*************************************************************************/
void USBHALHandleBusEvent ( void );
/*************************************************************************
Function:
BOOL USBHALStallPipe( TRANSFER_FLAGS pipe )
Description:
This routine stalls the given endpoint.
Preconditions:
USBHALInitialize must have been called to initialize
the USB HAL.
Parameters:
pipe - Uses the TRANSFER_FLAGS (see USBCommon.h) format to
identify the endpoint and direction making up the
pipe to stall.
Note: Only ep_num and direction fields are required.
Return Values:
TRUE if able to stall endpoint, FALSE if not.
Side Effects:
The endpoint will stall if additional data transfer is
attempted.
Given endpoint has been stalled.
Remarks:
Starting another data transfer automatically
"un-stalls" the endpoint.
*************************************************************************/
/*
Note: This function is implemented as a macro, calling directly into
an internal HAL routine.
*/
#define USBHALStallPipe OTGCORE_StallPipe
BOOL USBHALStallPipe( TRANSFER_FLAGS pipe );
/******************************************************************************
Function:
BOOL USBHALUnstallPipe( TRANSFER_FLAGS pipe )
Description:
This routine clears the stall condition for the given pipe.
PreCondition:
Assumes OTGCORE_DeviceEnable has been called and
OTGCORE_StallPipe has been called on the given pipe.
Parameters:
pipe - Uses the TRANSFER_FLAGS (see USBCommon.h) format to
identify the endpoint and direction making up the
pipe to unstall.
Return Values:
TRUE if able to stall the pipe, FALSE if not.
Side Effects:
The BSTALL and UOWN bits (and all other control bits) in
the BDT for the given pipe will be cleared.
Remarks:
None
*****************************************************************************/
/*
Note: This function is implemented as a macro, calling directly into
an internal HAL routine.
*/
#define USBHALUnstallPipe OTGCORE_UnstallPipe
BOOL USBHALUnstallPipe( TRANSFER_FLAGS pipe );
/**************************************************************************
Function:
USBHALGetStalledEndpoints
Description:
This function returns a 16-bit bitmapped value with a
bit set in the position of any endpoint that is stalled
(i.e. if endpoint 0 is stalled then bit 0 is set, if
endpoint 1 is stalled then bit 1 is set, etc.).
Preconditions:
USBHALInitialize must have been called to initialize
the USB HAL.
Parameters:
None
Return Values:
Bitmap of the currently stalled endpoints (see overview).
Remarks:
None
*************************************************************************/
/*
Note: This function is implemented as a macro, calling directly into
a HAL routine.
*/
#define USBHALGetStalledEndpoints OTGCORE_GetStalledEndpoints
UINT16 USBHALGetStalledEndpoints ( void );
/******************************************************************************
Function:
BOOL USBHALFlushPipe( TRANSFER_FLAGS pipe )
Description:
This routine clears any pending transfers on the given
pipe.
Preconditions:
USBHALInitialize must have been called to initialize the
USB HAL.
The caller must ensure that there is no possible way for
hardware to be currently accessing the pipe (see notes).
Parameters:
pipe - Uses the TRANSFER_FLAGS (see USBCommon.h) format to
identify the endpoint and direction making up the
pipe to flush.
Return Values:
TRUE if successful, FALSE if not.
Side Effects:
Transfer data for this pipe has been zero'd out.
Remarks:
This routine ignores the normal HW protocol for ownership
of the pipe data and flushes the pipe, even if it is in
process. Thus, the caller must ensure that data transfer
cannot be in process. This situation occurs when a
transfer has been terminated early by the host.
*****************************************************************************/
BOOL USBHALFlushPipe( TRANSFER_FLAGS pipe );
/**************************************************************************
Function:
USBHALTransferData
Description:
This routine prepares to transfer data on the USB.
If the system is in device mode, the actual transfer
will not occur until the host peforms an OUT request
to the given endpoint. If the system is in host mode,
the transfer will not start until the token has been
sent on the bus.
Preconditions:
1. USBHALInitialize must have been called to
initialize the USB HAL.
2. The endpoint through which the data will be
transferred must be configured as appropriate by a
call to USBHALSetEpConfiguration.
3. The bus must have been enumerated (either as a host
or device). Except for EP0 transfers.
Parameters:
flags - Flags consists of the endpoint number OR'd
with one or more flags indicating transfer
direction and such (see "Data Transfer
Macros" in USBCommon.h):
7 6 5 4 3 2 1 0 - Description
| | | | \_____/
| | | | +----- Endpoint Number
| | | +---------- Short or zero-size pkt
| | +------------ Data Toggle 0/1
| +-------------- Force Data Toggle
+---------------- 1=Transmit/0=Receive
buffer Address of the buffer to receive data.
size Number of bytes of data to transfer.
Return Values:
TRUE if the HAL was able to successfully start the
data transfer, FALSE if not.
Side Effects:
The HAL has prepared to transfer the data on the USB.
Ramarks:
The HAL will continue the data transfer, keeping track
of the buffer address, data remaining, and ping-pong
buffer details internally when USBHALHandleBusEvent is
called (either polled or in response to an interrupt).
The caller will receive notification that the transfer
has completed when the EVT_XFER event is passed into
the USBHALBusEventCallout call-out function.
*************************************************************************/
BOOL USBHALTransferData ( TRANSFER_FLAGS flags,
void *buffer,
unsigned int size );
/*************************************************************************
Function:
USBHALSetEpConfiguration
Description:
This routine allows the caller to configure various
options (see "Flags for USBHALSetEpConfiguration",
below) and set the behavior for the given endpoint.
Precondition:
USBHALInitialize has been called.
Parameters:
ep_num - Number of endpoint to configur, Must be
(ep_num >=0) && (ep_num <= USB_DEV_HIGHEST_EP_NUMBER)
max_pkt_size Size of largest packet this enpoint can
transfer.
flags - Configuration flags (see below)
Return Values:
TRUE if successful, FALSE if not.
Side Effects:
The endpoint has been configured as desired.
Remarks:
The base address and size of the buffer is not set by
this routine. Those features of an endpoint are
dynamically managed by the USBHALTransferData routine.
An endpoint can be "de-configured" by setting its max
packet size to 0. When doing this, you should also
set all flags to 0.
*************************************************************************/
BOOL USBHALSetEpConfiguration ( BYTE ep_num, UINT16 max_pkt_size, UINT16 flags );
/* Flags for USBHALSetEpConfiguration */
#if defined(__18CXX)
#define USB_HAL_TRANSMIT 0x0400 // Enable EP for transmitting data
#define USB_HAL_RECEIVE 0x0200 // Enable EP for receiving data
#define USB_HAL_HANDSHAKE 0x1000 // Enable EP to give ACK/NACK (non isoch)
#define USB_HAL_NO_INC 0x0010 // Use for DMA to another device FIFO
#define USB_HAL_HW_KEEPS 0x0020 // Cause HW to keep EP
#else
#define USB_HAL_TRANSMIT 0x0400 // Enable EP for transmitting data
#define USB_HAL_RECEIVE 0x0800 // Enable EP for receiving data
#define USB_HAL_HANDSHAKE 0x0100 // Enable EP to give ACK/NACK (non isoch)
/* Does not work, Fix this if needed. 3/1/07 - Bud
#define USB_HAL_NO_INC 0x0010 // Use for DMA to another device FIFO
#define USB_HAL_HW_KEEPS 0x0020 // Cause HW to keep EP
*/
#define USB_HAL_ALLOW_HUB 0x8000 // (host only) Enable low-spd hub support
#define USB_HAL_NO_RETRY 0x4000 // (host only) disable auto-retry on NACK
#endif
/*************************************************************************
Function:
USBHALInitialize
Description:
This call performs the basic initialization of the USB
HAL. This routine must be called before any of the
other HAL interface routines are called.
Precondition:
The system has been initialized.
Paramters:
flags - Initialization flags
Return Values:
TRUE if successful, FALSE if not.
Side Effects:
The USB HAL SW stack was initialized.
Remarks:
This routine can be called to reset the controller.
*************************************************************************/
BOOL USBHALInitialize ( unsigned long flags );
#endif // _USB_HAL_H_
/*************************************************************************
* EOF
*/