stuck at create-backingfiles-partition: Modifying partition table for backing files partition...

[mlduncombe]

I having problems getting things up and running.

teslausb-headless-setup-log gets stick at create-backingfiles-partition: Modifying partition table for backing files partition...

If I

/etc/rc.local

then I see

Downloaded /tmp/create-backingfiles-partition.sh ...
DATA_DRIVE not set. Proceeding to SD card setup
create-backingfiles-partition: Checking existing partitions...
firstbackingfilesmutable 124735488
first mutable 124530688
create-backingfiles-partition: Modifying partition table for backing files partition...
warning: /dev/mmcblk0: partition 5 is not defined yet
Checking that no-one is using this disk right now ... FAILED

This disk is currently in use - repartitioning is probably a bad idea.
Umount all file systems, and swapoff all swap partitions on this disk.
Use the --no-reread flag to suppress this check.

Disk /dev/mmcblk0: 59.5 GiB, 63864569856 bytes, 124735488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x8b3aede6

Old situation:

Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 * 8192 520191 512000 250M c W95 FAT32 (LBA)
/dev/mmcblk0p2 520192 4714496 4194305 2G 83 Linux
/dev/mmcblk0p3 4714497 124530687 119816191 57.1G 83 Linux
/dev/mmcblk0p4 124530688 124735487 204800 100M 83 Linux

/dev/mmcblk0p5: Extended partition does not exists. Failed to add logical partition.
Leaving.

[marcone]

This:

/dev/mmcblk0p1 * 8192 520191 512000 250M c W95 FAT32 (LBA)
/dev/mmcblk0p2 520192 4714496 4194305 2G 83 Linux
/dev/mmcblk0p3 4714497 124530687 119816191 57.1G 83 Linux
/dev/mmcblk0p4 124530688 124735487 204800 100M 83 Linux

seems to show that TeslaUSB already successfully added the required partitions (the last two shown above). Not sure what 5th partition it is trying to create there. I did change something with respect to partitioning yesterday, so maybe there's an edge case I missed. I'll take a look.
What device/image are you using?

[marcone]

Found the problem. Will have a fix soon.

[marcone]

Should be fixed now.

[mlduncombe]

Looks like its fixed

Am now seeing

TESLAUSB_SETUP_FINISHED

and get

Sun 11 Feb 08:33:45 GMT 2024 : All done.

in the setup log

Will test in car later

update: tested and working well in the car

thanks