-
Notifications
You must be signed in to change notification settings - Fork 0
[RUPEE] FortunaStake Setup Guide
Step 1 Click on Receive Coins tab in top toolbar and select the button in the bottom left hand corner named New Address. Type the Label for address (Example - FS1) and click ok.
Step 2 Right Click new address entry in the Address List (Will pop up after you click ok) and click Copy Address. From there head to the Send Coins tab in the top toolbar and paste in the Pay To section (The Label should auto-fill with the label name you entered when creating the address). In the Amount section type 8400 then click the Send button in the bottom right corner. Confirm Send & Confirm Transaction Fee.
Step 3 Wait 500 Confirmations (During the wait you can configure the VPS server)
Log into VPS (Can be acquired from a service like Vultr, OVH, or DigitalOcean) via Putty connection
Update Linux
sudo apt-get update && apt-get upgrade -y
Install Dependencies
sudo apt-get --assume-yes install git unzip build-essential libssl-dev libdb++-dev libboost-all-dev libqrencode-dev libminiupnpc-dev libevent-dev obfs4proxy
sudo apt-get install libevent-dev && sudo apt-get install obfs4proxy
Install Fail2Ban
sudo apt install fail2ban
Create Swap File
sudo fallocate -l 2G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
Install Firewall
sudo apt install ufw -y
ufw default allow outgoing
ufw default deny incoming
ufw allow ssh/tcp
ufw limit ssh/tcp
ufw allow 64634/tcp
ufw allow 64630/tcp
ufw logging on
ufw --force enable
Compile Daemon
git clone https://github.com/Rupee-Foundation/Rupee-Evolution
cd Rupee-Evolution
git checkout master
cd src
sudo make -f makefile.unix
strip rupeeevolutiond
sudo cp ~/Rupee-Evolution/src/rupeeevolutiond /usr/local/bin/rupeeevolutiond
./rupeeevolutiond -daemon
./rupeeevolutiond stop or killall rupeeevolutiond
Then you need to modify the rupeeevolution.conf file in the .rupeeevolution folder
nano /root/.rupeeevolution/rupeeevolution.conf
Then change port from 64630 to-> 64638
Set fortunastake=0 to 1 (true)
Set fortunastakeaddr=VPSIP:64638 (Copy the IP address of the VPS you are logged into and save this IP address somewhere)
Set fortunastakeprivkey= with the genkey. To get this load up your local Qt GUI wallet that you performed the self send on and click the Debug Window button in the Lower left section of the toolbar. From there type fortunastake genkey and use that in the VPS conf. Please save it as well in the same place you saved the VPS IP address information.
After press Ctrl + X then Y then press Enter
After run the daemon to sync with the network
./rupeeevolutiond -daemon
Step 1
Load the Qt Wallet and bring up the debug console once more. Type fortunastake outputs to get the Tx Hash and Output Index on the self send(Example: "5af1128578d8d501b09ba03a93b99bb9929bad1fa5bf7a4a84332ba3ed83c802" <--Tx Hash : "0" <-- Output Index). Save this information in the same place you saved the VPS IP address & your fortunastake genkey.
Step 2 Click on the Fortuna Stakes tab in the top toolbar and select My Rupee Evolution Fortuna Stakes list. You should then see the Create button on the upper right hand corner above the Collateral address section. Click this
Step 3 A window will popup after clicking the Create button, from here you must fill out the information with the data we saved along the way
Alias - Address Label for Selfsend - Example: FS1
Address - VPSIP:64638
Privkey - fortunastake genkey
TxHash - Transaction Hash from fortunastake outputs
Output Index - Output Index from fortunastake outputs
Make sure there are NO SPACES before or after any of the entered information
To Edit fortunastake.conf information head to AppData/Roaming folder and enter the Rupee Evolution folder
Step 4 Edit the rupeeevolution.conf file for your Qt Wallet (Tools -> Open Wallet Configuration File. Or head to AppData/Roaming/RupeeEvolution Folder to edit)
Add fsconflock=1 to conf file (under staking=1)
Save Changes
Step 5 Restart Qt Wallet
Step 1
Open Debug Console and type fortunastake start-alias FS1
(Alternatively you can just press the Start or Start All button in the Fortuna Stakes -> My Rupee Evolution Fortuna Stakes)
Step 2
Head to configured VPS and type ./rupeeevolutiond fortunastake start
To get information on Fortuna Stake from vps type ./rupeeevolutiond fortunastake status
./rupeeevolutiond masternode status also still works
In the My Rupee Evolution Fortuna Stakes tab in your QT wallet used for the self-send, the QT will show Registered once you start your FortunaStake and then Verified, Online, and finally Active. Wait 1 complete round for rewards. 1 round is roughly how many FortunaStakes are up, and that's how many blocks a round will last.