feat: $LightScript ( Fixes #104 )

docs/Set-HueRule.md

@@ -1,99 +1,99 @@
 Set-HueRule
 -----------
+
 ### Synopsis
 Sets a Hue Rule
 
 ---
+
 ### Description
 
 Sets a Hue Rule.  Hue Rules are used to automatically change your Hue Lights and devices when conditions occur.
 
 ---
+
 ### Related Links
 * [Get-HueRule](Get-HueRule.md)
 
-
-
 * [Remove-HueRule](Remove-HueRule.md)
 
-
-
 ---
+
 ### Examples
-#### EXAMPLE 1
+> EXAMPLE 1
+
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/55/state/status" -eq "1"
 } -Action {
     Set-HueLight -Name "Sunroom*" -ColorTemperature 420
 } -Name BrightenRoom
 ```
+Set a rule that when 
 
-#### EXAMPLE 2
 ```PowerShell
-# Set a rule that when 
 Set-HueRule -Condition {
     "/sensors/61/state/buttonevent" -eq "4002"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -Brightness 0.01
 } -Name SunroomDimmerTap
 ```
+> EXAMPLE 3
 
-#### EXAMPLE 3
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "4003"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -Off
 } -Name SunroomDimmerHoldDownToTurnOff
 ```
+> EXAMPLE 4
 
-#### EXAMPLE 4
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "1003"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -On
 } -Name SunroomDimmerHoldUpToTurnOn
 ```
+> EXAMPLE 5
 
-#### EXAMPLE 5
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "1002"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -On -Brightness .8
 } -Name SunroomDimmerTapOn
 ```
+> EXAMPLE 6
 
-#### EXAMPLE 6
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "2003"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -BrightnessIncrement .1
 } -Name SunroomDimmerHoldBright
 ```
+> EXAMPLE 7
 
-#### EXAMPLE 7
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "2002"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -BrightnessIncrement .05
 } -Name SunroomDimmerTapBright
 ```
+> EXAMPLE 8
 
-#### EXAMPLE 8
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "3002"
 } -Action {
     Set-HueLight -RoomName "Sunroom" -BrightnessIncrement -.05
 } -Name SunroomDimmerTapDarken
 ```
+> EXAMPLE 9
 
-#### EXAMPLE 9
 ```PowerShell
 Set-HueRule -Condition {
     "/sensors/SunroomDimmerSwitch/state/buttonevent" -eq "3003"
@@ -103,47 +103,27 @@ Set-HueRule -Condition {
 ```
 
 ---
+
 ### Parameters
 #### **Name**
-
 The name of the rule.
 
+|Type      |Required|Position|PipelineInput|
+|----------|--------|--------|-------------|
+|`[String]`|true    |1       |false        |
 
-
-> **Type**: ```[String]```
-
-> **Required**: true
-
-> **Position**: 1
-
-> **PipelineInput**:false
-
-
-
----
 #### **Condition**
-
 The condition.
 If the value is a ScriptBlock, only operators and their surrounding conext will be accepted.
 Each condition should take the form: `"/resource/id/restOfAddress" -operator "value"`.
 Rules may have more than one condition.
 If the address is not a resource followed by a digit, the resource will be looked up by name.
 
+|Type          |Required|Position|PipelineInput|Aliases   |
+|--------------|--------|--------|-------------|----------|
+|`[PSObject[]]`|true    |2       |false        |Conditions|
 
-
-> **Type**: ```[PSObject[]]```
-
-> **Required**: true
-
-> **Position**: 2
-
-> **PipelineInput**:false
-
-
-
----
 #### **Action**
-
 The action.
 If this value is a Script Block, only commands from this module that have the parameter -OutputInput may be called.
 If the input is a ScriptBlock
@@ -154,92 +134,50 @@ comes from this module
 and has the -OutputInput parameter.
 Otherwise, check for the required properties.
 
+|Type          |Required|Position|PipelineInput|Aliases|
+|--------------|--------|--------|-------------|-------|
+|`[PSObject[]]`|true    |3       |false        |Actions|
 
-
-> **Type**: ```[PSObject[]]```
-
-> **Required**: true
-
-> **Position**: 3
-
-> **PipelineInput**:false
-
-
-
----
 #### **DeviceID**
-
 If provided, the schedule will only run on the bridge with a particular device ID
 
+|Type      |Required|Position|PipelineInput        |
+|----------|--------|--------|---------------------|
+|`[String]`|false   |named   |true (ByPropertyName)|
 
-
-> **Type**: ```[String]```
-
-> **Required**: false
-
-> **Position**: named
-
-> **PipelineInput**:true (ByPropertyName)
-
-
-
----
 #### **IPAddress**
-
 If provided, the schedule will only run on the bridge found at the provided IP address
 
+|Type         |Required|Position|PipelineInput        |Aliases|
+|-------------|--------|--------|---------------------|-------|
+|`[IPAddress]`|false   |named   |true (ByPropertyName)|IP     |
 
-
-> **Type**: ```[IPAddress]```
-
-> **Required**: false
-
-> **Position**: named
-
-> **PipelineInput**:true (ByPropertyName)
-
-
-
----
 #### **Disable**
-
 If set, will disable the rule.
 
+|Type      |Required|Position|PipelineInput|
+|----------|--------|--------|-------------|
+|`[Switch]`|false   |named   |false        |
 
-
-> **Type**: ```[Switch]```
-
-> **Required**: false
-
-> **Position**: named
-
-> **PipelineInput**:false
-
-
-
----
 #### **WhatIf**
 -WhatIf is an automatic variable that is created when a command has ```[CmdletBinding(SupportsShouldProcess)]```.
 -WhatIf is used to see what would happen, or return operations without executing them
 #### **Confirm**
 -Confirm is an automatic variable that is created when a command has ```[CmdletBinding(SupportsShouldProcess)]```.
 -Confirm is used to -Confirm each operation.
-    
+
 If you pass ```-Confirm:$false``` you will not be prompted.
-
-
+
 If the command sets a ```[ConfirmImpact("Medium")]``` which is lower than ```$confirmImpactPreference```, you will not be prompted unless -Confirm is passed.
 
 ---
+
 ### Outputs
 * [Management.Automation.PSObject](https://learn.microsoft.com/en-us/dotnet/api/System.Management.Automation.PSObject)
 
-
-
-
 ---
+
 ### Syntax
 ```PowerShell
 Set-HueRule [-Name] <String> [-Condition] <PSObject[]> [-Action] <PSObject[]> [-DeviceID <String>] [-IPAddress <IPAddress>] [-Disable] [-WhatIf] [-Confirm] [<CommonParameters>]
 ```
----